How to connect the television, Television hook-up, Connecting precautions – Sony MDP-A500 User Manual
Page 11: How to cormect the television, So that you can get a
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
How to Connect the Television'
To play LDs or CDVs, hook up a television to the Multi Disc Player. Take out the supplied audio/video connecting
cable (yellow, red and white plugs). Use this to connect the player to the television.» Once you have hooked-up the
television, set the input selector on the TV to "Video". Before connecting or disconnecting any of the cables, turn off all
equipment.
Television Hook-Up
MDP-500
Antenna
Input
Television
VCR
'O"
Input Jacks
(Video/Audio)
VHF Out terminals or
VIdeo/AudIo Out Jacks
"
Connect to the external video/audio inputs o
fa VCR.
-----
^^
---------
J
Connecting Precautions
• Make sure all equipment is turned off before connecting or disconnecting any cables.
• Connection methods may differ; when in doubt about a connection consult the TV or VCR manufacturer's manual.
• If the sound or picture is disturbed by noise, try moving the equipment farther apart.
• Firmly insert plugs into the jacks. A loose connection may cause noise.
• To prevent later interference with TV broadcast reception, turn off all equipment connected but not currently in use.
• If the TV only has a monaural phono jack for audio input, use a VMC-910MSI915MS Connecting Cable (not supplied).
** With theMDP-5(X), you can use S Video connection. If your TV has an S Video Input jack, obtain a YC-15V S Video Connecting
Cable and use it to connect the TV to your MDP-500
so that you can get a
better image.
Installation and Connection
11