How to determine the correct operating voltage, About operating voltage – Sony MDP-A500 User Manual
Page 4
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
About Operating Voltage-
Before operating the Multi Disc Player, make sure that the operating voltage of your unit is identical with that of your
local power supply.
How to Determine the Correct Operating Voltage
• The MDP-500 operates at 120 V AC 60 Hz only and does not have a voltage selector.
• The MDP-A500 has a voltage selector.
Before operating the unit, find out the local voltage, and if necessary reset the selector at the rear of the Multi Disc
Player to the voltage corresponding to your local power supply (120,220 or 240 volts AC). The voltage selector of this
unit is set to 220 V AC originally. When using in Malaysia, reset the selector to 240 V AC.
To reset the voltage selector, disconnect the power cord and turn the selector with a blade screwdriver so that the
arrow on the rear panel points to the appropriate voltage.
How to Use the AC Plug Adaptor (supplied with the MDP-A500)
• If the AC plug on your MDP-A500 does not fit into the wall outlet, attach the supplied AC plug adaptor.
If you have any questions or problems concerning your unit, please contact your nearest Sony dealer.