Audio power specifications, Amplifier section, Specifications – Sony MHC-F150 User Manual
Page 56
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Specifications
AUDIO POWER SPECIFICATIONS:
U.5.A. models:
MHC-F250AV
POWERS OUTPUT AND TOTAL
1 lARMONIC DISTORTION:
with 8 ohm loads both channels driven, from
70-20,000 Hz; rates 100 watts per channel
minimum RMS power, with no more than
0»‘X) total harmonic distortion from 250
milliwatts to rated output.
MHC-F150
POWER OUTPUT AND TOTAL
I lARMONIC DISTORTION:
with 8 ohm loads both channels driven, from
70-20,000 Hz; rates 100 watts per channel
minimum RMS power, with no more than
0.9‘X> total harmonic distortion from 250
milliwatts to rated output.
Amplifier section
North American models:
MHC-F250AV:
Front Speaker:
Cunlinuous RMS power output
100 + 100 watts
(8 ohms at 1 kHz,
10%THD)
Total harmonic distortion
less than 0.09%
(8 ohms at 1 kHz,
40 W)
Center Speaker:
Continuous RMS power output
25 watts
(8 ohms at 1 kHz,
10% THD)
Rear Speaker:
Continuous RMS power output
12.5 + 12.5 watts
(16 ohms at 1 kHz,
10% THD)
MHC-F150:
Continuous
RMS power output
100 +100 watts
(8 ohms at 1 kHz,
10% THD)
European models:
The following measurd at AC 230 V, 50 Hz
DIN power output (Rated)
50 + 50 watts
(8 ohms at 1 kHz, DIN)
Continuous RMS power output (Reference)
60 + 60 watts
(8 ohms at 1 kHz,
10% THD)
Other models:
The followinganeasured at AC 120/240 V, 50/60 Hz
Continuous RMS power output (Rated)
no+ 110 watts
(8 ohms at 1 kHz,
]%THD)
Continuous RMS power output (Reference)
130 + 130 watts
(8 ohms at 1 kHz,
10% THD)
Peak music power output (Reference)
1500 watts
The following measured at AC 110/220 V, 60 Hz
Continuous RMS power output (Rated)
90 + 90 watts
(8 ohms at 1 kHz,
1% THD)
Continuous RMS power output (Reference)
no + no watts
(8 ohms at 1 kHz,
10% THD)
Inputs
VIDEO/MD IN;
voltage 250 mV/450 mV,
(phono jacks)
impedance 47 kilohms
MIX MIC (except for Australian and European
models): (phone jack)
sensitivity 1 mV,
impedance 10 kilohms
Outputs
VIDEO/MD OUT:
voltage 250 mV
(phono jacks)
impedance 1 kilohms
PHONES;
accepts headphones of 8
(stereo phone jack)
ohms or more
SPEAKER;
MHC-F250AV;
accepts impedance of 8 to
16 ohms
MHC-F150;
accepts impedance of 8 to
16 ohms
MHC-FRIO (European models):
accepts impedance of 8 to
16 ohms
MHC-FRIO (Other models):
accepts impedance of 8 to
16 ohms
REAR SPEAKER:
MHC-F250AV;
accepts impedance of 16
ohms
MHC-F150:
accepts impedance of 16
ohms
CENTER SPEAKER
MHC-F250AV:
accepts impedance of 8
ohms
SUPER WOOFER:
Voltage 1 V, impedance 1
kilohms