Note, Step3: setting the time – Sony MHC-F150 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
1
Press PRO LOGIC (or PRO LOGIC
ON / OFF on the remote).
"PRO LOGIC ON" appears.
2
Press T.TONE ON / OFF on the
remote.
The test tone is heard from the speakers
in the following order. Adjust the
volume of the test tone.
Front (left) ♦ Center ♦ Front (right)
I
■ Rear
3
From your listening position, press
CENTER LEVEL (+/-) and REAR
LEVEL (+/-) on the remote to
adjust the volume.
The volume levels from each speaker
must become the same.
4
Press T.TONE ON/OFF when you
are done adjusting.
The test tone turns off.
Tip
If you turn VOLUME (or press VOLUME +/- on the
remote) all the speaker volumes change.
Note
The test tone feature works only for Dolby Pro Logic
Surround sound.
Step3: Setting the
time
You must set the time before using the timer
functions.
The clock is on a 24-hour system for the
European model, and a 12-hour system for
other models.
The 12-hour system model is used for
illustration purposes.
1 2,4
3,5
1
Press CLOCK / TIMER SET.
The hour indication flashes.
-; PG 0-P !r
2
Turn the jog dial to set the hour.
continued