Troubleshooting, There's no sound, The cd does not play – Sony CDP-CA8ES User Manual

Page 19: The recording level has changed, Troubleshooting specifications, Additional information

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Additional Information

1

Troubleshooting

Specifications

[f you experience any of the following difficulties while

using the player, use this troubleshooting guide to help
you remedy the problem. Should any problem persist,
consult your nearest Sony dealer.

There's no sound.

^Check that the player is connected securely.
“^Make sure you operate the amplifier correctly.
^Adjust the playback level using the LINE OUT/

PHONE LEVEL control.

The CD does not play.

"♦■There's no CD inside the player ("-NO DISC-"

appears). Insert a CD.

^Place the CD with the label side up on the disc

tray correctly.

^Clean the CD (see page 18).
^Moisture has condensed inside the player.

Remove the disc and leave the player turned on
for about an hour (see page 18).

The recording level has changed.

^When you connect the amplifier via the

VARIABLE LINE OUT jacks, the recording level

changes if you adjust the LINE OUT/PHONE

LEVEL control on the player or press LINE

OUT LEVEL on the remote during recording.

Compact disc player

Laser

Wavelength

Frequency response

Signal-to-noise ratio

Dynamic range

Harmonic distortion

Channel separation

Output

Semiconductor laser

7S0 - 790 nm

2 Hz to 20kll/. .t0..3clB

More than 117 dB

More than 100 dB

CDP-C.'XOES: Less than 0.0023%
CD1’-CA8F,S: Less than 0.002,3%

More than 1 10 dB

jack
type

Maximum
output

level

Load
impedance

LINE OUT

Phono

2 V

Over 10 kilohms

(FIXED)

j¿к'ks

(at 50 kilohms)

LINE OUT

Phono

2 V

Over 50 kilohms

(VARIABLE)

jacks

(at 50 kilohms)

DIGITAL

Optical

-18 dBm

Wave length: 660 nm

OUT

output

(OPTICAL)

connector

PHONES

Stereo

13 mW

32 ohms

phone
jack

The remote does not function.

General

"♦Remove the obstacles in the path of the remote

and the player.

Power requirements

120 V AC, 60 Hz

“♦Point the remote at the remote sensor

H

on the

Power consumption

CDP-CA9ES; 17 W

player.

CDP-CA8LS: 15 W

^Replace all the batteries in the remote with new

Dimensions (approx.)

430

X

123

X

4ÜÜ mm

ones if they are weak.

(w/h/d)

(17

X

3

X

15 3/4 in.) incl. projecting

parts

The player functions incorrectly.

“♦The microcomputer chips may be operating

Mass (approx.)

CÜP-CA9ES: 7.5 kg (16 lbs 9 oz)
CDP-CA8LS: 7.0 kg (13 lbs 7 oz)

incorrectly. Turn the power off, then turn it
back on to reset the player.

Supplied accessories

Audio cord (2 phono filugs - 2 phono plugs) (1)
Remote commander (remote) (1)
Sony SUM-3 (NS) batteries (2)

Design and specifications are subject to change without notice.

19

Advertising
This manual is related to the following products: