Getting started, Q' when to replace batteries, Hooking up the system – Sony CDP-CA8ES User Manual
Page 5: Notes, Unpacking, Inserting batteries into the remote, Overview, Hookups
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Getting Started
I
Unpacking
Check that you received the following items;
• Audio ccrnnecting cord (1)
• Remote commander (remote) (I )
RM-D645 for CDP-CA9ES
RM-D515 for CDP-CA8ES
• Sony SUM-3 (NS) batteries (2)
Inserting batteries into the remote
You can control the player using the supplied remote.
Insert two size AA (R6) batteries by matching the +
and - on the batteries. When using the remote, point it
at the remote sensor IE on the player.
'Q'
When to replace batteries
With normal use, the batteries should last for about six
months. When the remote no longer operates the player,
replace all the batteries with new ones.
Hooking Up the System
Overview
This section describes how to hook up the CD player to
an amplifier. Be sure to turn off the power of each
component before making the connections.
CD player
What cords will I need?
Audio cord (supplied) (1)
Notes
• Do not leave the remote near an extremely hot or humid
place.
• Do not drop any foreign object into the remote casing,
particularly when replacing the batteries.
• Do not expose the remote sensor to direct sunlight or
lighting apparatuses. Doing so may cause a malfunction.
• If you don't use the remote for an extended period of time,
remove the batteries to avoid possible damage from battery
leakage and corrosion.
Hookups
When connecting an audio cord, be sure to match the
ccilor-coded cord to the appropriate jacks on the
components: Red (right) to Red and White (left) to
White. Be sure to make connections firmly to avoid
hum and noise.
CD player
Amplifier
LINE O UT '
r-;x ,
INPUT '
FIXED
CD
R0-O^