Scanning the beginning of each program in sequence – Sony CCD-TR700 User Manual
Page 37
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Scanning the Beginning of Each Marking Position - Index Scan
You can scan the begining of each marking position in succession. Use the Remote Commander. To view
the index number on a TV, press DISPLAY.
(1)
Press INDEX on the Remote Commander during normal playback or playback pause mode.
Ù) Press ◄◄ or ►►. The tape rewinds or advances rapidly and plays back for approximately 10 seconds
from the point on which the index signal was marked. If you want to continue playback, press 0-. When
you do not press any button, the tape is automatically scatmed to the next program.
INDEX
REWe QFF
Q (HI
Scanning the Beginning of Each Program in Sequence
(1)
Press INDEX on the Remote Commander during stop mode.
(2)
Press or ►►. The tape rewinds
or advances rapidly and plays back for approximately 10 seconds horn the point on which an index
signal was marked.
(3)
Press O when the desired program starts playback.
To cancel Index scan mode
Press O. Normal playback resumes.
Id
9
n
S
ai
i;
S
I
9
37