Ac power adaptor, When the charge lamp flashes – Sony CCD-TR700 User Manual
Page 55
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
AC Power Adaptor
Symptom
Cause
Corrective Actions
page
1
m
3
3
The POWER lamp does
not light.
—
Set the selector to the center position
and disconnect the power cord. After
about one minute, reconnect the
power cord and set the selector to
CHARGE again.
—
The CHARGE lamp
flashes.
See the following chart.
When the CHARGE Lamp Flashes
Check through the following chart.
•
• If you use a battery pack which you have just bought or which has been, left unused for a long time,
the CHARGE lamp may flash at the first (Urging. But this is not a problem. Repeat again to charge
with the same battery pack.
55
Advertising