Lesson 35: transferring objects via infrared – HP 48G User Manual
Page 100
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Lesson 35: Transferring Objects Via Infrared
The HP 48 has bot.h wired and infrared serial input/oiitput ports
to allow yon to transfer objects to and from other devices—printers,
computers, and other HP 48s.
Serial transfer requires the optional Serial Interface Cable (see
your HP dealer). Infrared transfer between two HP 48s, can be
accomplished quickly and easily without any additional equipment..
To transfer an object from one HP 48 to another:
1. Line up the infrared ports by lining up the A marks (near the
Hewlett-Packard logo just above the display ). The calculators
should be no farther apart than 2 inches.
2. Receiver.
■ Change to the directory where the new object is to be stored.
B Press (¿)
■ Select Get froi'! HP 48 from the menu and press
■3. Sender.
B Press
Select Send to
from the menu and press
Type or CHuOS the name of the object to be transferred into the
Mi
Press
field.
8-2 Special Features