Craftsman 919.762000 - Manual (Page 5)

ACAUTiON
THE POWERFUL SPRAY FROM YOUR PRESSURE WASHER IS CAPABLE OF CAUSING
DAMAGE TO FRAGILE SURFACES SUCH AS; WOOD, GLASS, AUTOMOBILE PAINT,
AUTO STRIPPING AND TRIM, AND DELICATE OBJECTS SUCH AS FLOWERS AND
SHRUBS. BEFORE SPRAYING, CHECK THE ITEM TO BE CLEANED TO ASSURE
YOURSELF THAT IT IS ROBUST ENOUGH TO RESIST DAMAGE FROM THE FORCE OF
THE SPRAY. AVOID THE USE OF THE CONCENTRATED SPRAY STREAM EXCEPT FOR
VERY STRONG SURFACES LIKE CONCRETE AND STEEL.
OPERATING UNIT WITH WATER SUPPLY SHUT-OFF WITHOUT FLOW OF WATER
WILL RESULT IN EQUIPMENT DAMAGE. YOU SHOULD NEVER RUN THIS PRESSURE
WASHER FOR MORE THAN 2 MINUTES WITHOUT PULLING THE TRIGGER TO
ALLOW COOL WATER TO ENTER THE PUMP AND THE HEATED (RECIRCULATED)
WATER TO EXIT. RUNNING THE PRESSURE WASHER WITH WATER SUPPLY SHUT­
OFF WOULD VOID YOUR WARRANTY.
OPERATING INSTRUCTIONS
Quick Reference Guide
Everything Below is Detailed
in this Manual — Please See
Reference Pages Noted Below
lASSEMBLY
^JiNsmucnoNS
I Reference Below Right)
Connect Handle to Frame
• Connect Wand to Gun
Attach High Pressure Hose
Attach Water Source (Garden
Hose)
PRESTART
INSTRUCTIONS
ijrencgPage 5)
ill Gas tank
j # Check Engine Oil
S T^lifn Water Source On
^• Check for Leaks
¡STARTING
I
mstruciions
(Reference Page 5)
1
SLIDETHROTTLECONTROL
TO RUN POSITION
2
PUSH PRIMER BULB 3TIMES-WAIT
2SECONDS BETWEEN EACH PUSH
3
PULLSTART
(NOTE: If engine doesn't
start right away, trigger
gun to depressurize the unit)
HELPLINE;
\-stryy