High pressure instructions, Using soap/chemicals, Power – Craftsman 919.762000 User Manual
Page 8: Nozzle cleaning
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
HIGH PRESSURE INSTRUCTIONS
Push Nozzle Forward
for Low Pressure
Pull Back Nozzle
for High Pressure
OPEN (3/8" GAP)
to Draw Chemical
This Pressure
Washer is Preset at
the Factory to
Achieve Majdmum
Pressure at Fuii
Throttie
CLOSED (1/8" GAP)
for High Pressure
0° Degree Narrow
Spray Pattern Greatest
Cleaning Impact Turn
Counterclockwise
60° Degree Wide
Spray Pattern Great
est Cleaning Coverage
Turn Clockwise
1. The power washer spray pattern may be adjusted by rotating the nozzle head, clockwise or
counterclockwise.
2. For the narrowest spray pattern (greatest cleaning impact), rotate nozzle head counterclockwise.
3. For widest spray pattern (greatest cleaning coverage), rotate nozzle head clockwise.
USING SOAP/CHEMICALS
Excessive soap concentration does not necessarily improve cleaning
power.
A
NOTE: Follow chemical manufacturer’s label & safety directions!
For chemical recommendations specific to your application, contact your local
janitorial supply or chemical manufacturer.
Use EX-CELL 5000 (Formulated for EX-CELL Pressure Washers) Or Contact Your Local Janitorial
or Chemical Supplier for Recommendations for Your Specific Application.
NOZZLE CLEANING
1. Remove wand from gun by unscrewing at coupler.
2. Open the adjustable nozzle atthe end of the wand to the 0 position by
turning counterclockwise. (See Diagram 1). This will allow maximum
accessibility to clean the nozzle. Be carehji not to damage metal
spray fins.
3. insert the nozzle cleaning wire or straightened paper clip into the
nozzle orifice. Move gently in and out to clear blockage from nozzle.
(See Diagram 2).
4. Flush water through the nozzle backwards with garden hose.
5.
8
Diagram 1
Nozzle Fins Open
Diagram 2
Insert Cleaning Tool