Fill gas tank, Phlyl, Check – Craftsman 919.762000 User Manual
Page 7: Engine, Turn water source on, Check for leaks, Prestart instructions, Starting instructions, Check engine oil
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
PRESTART INSTRUCTIONS
STEP#1
Fill Gas Tank
phlyl
STEP#2
Check
Engine
Oil
30 Weight
Oil
• Be sure the engine is in a level position.
• Remove the oil filler cap.
• To check oil level, check to ensure oil is to full
mark on the dipstick.
• If the level is low, add oil to the full mark with
30 weight detergent oil.
• Reinstall the oil filler cap/dipstick.
STEP#3
Turn Water
Source On
STEP#4
Check for Leaks
M
Leaking from Water Inlet Source
Does Not Affect Performance
if; leRKS’ ora!RAOT TlOni
11*10^'-'
-
mm
WII llliil
r mnlaM
onQ CliQCK Ql
o-ringi
IMPORTANT:
Running the engine with a low oil level can cause engine damage.
STARTING INSTRUCTIONS
TO RUN POSITION
iTN.
2 PUSH PRIMER BULB
/>^\
3 TIMES-WAIT 2 SECOND
( X M 1
BETWEEN EACH PUSH
m 1
3 PULLSTART
1—1
u 0
(NOTE: If engine doesn't
m
start right away, trigger gun
\±i
Damaifie ^ Pump.
SPECIFICATIONS:
Model 919.762000
Operating Pressure 2000 PSI • Gallons Per Minute — 2GPM
• Engine: 6.0 HP Craftsman • Pump: Wobble Plate Oil Bath
• Chemical Injection - Under L ;« ■,(<r
H o s e : V 4 ” x 2 5 ’ • Gun: Trigger Control
• Wheels: Two 8” Semi-Pneumatic