Craftsman 123.24201 - Manual (Page 12)

SECTION 3 i .............
FIRST-TIME SET-UP REQUIREMENTS
Lug Nuts: Tightening Sequence, Torque Requirements
• Before unfbiding your Trisiler. remove the plastic Zip Tic holding the Locking Pin
to the Tongue of the Fraiter Do not cut the Lanyard ,j._-------------^Locking Pin
~~———— Lanyard
A
WARNING A
Lag nuts arc prone to [ooseti after initial inslailaiion possibly castsing
ilic wheel So separate iVom the trailer leading to property duniage, death
or serious iitjury
• Check lug nuts for iiglitness on a new trailer or when M'liecifs) have
been remoumed after the (irsi 10, 25 and 5(1 miles of di iving and
after any insptsci
• Lug nuts for the tires must be lighiened by the user betbre each use
• Scars cattnoS be heid responsible for damages caused by loosened
lug nuts
^..................................................................................................................... ......... r
• Before towing the Trailer, you must cnsuie the lug nuts are tightened to the pioper
torque
• The torque requirements for the Lug Nuts are 95 - 120 ft/lb. Do not exceed 120
ft/Ib of torque Tighten the Lug Nuts in the sequence below before you leave the
dealer
Tifiliien lug nuts
in the following
order;
Verily the proper PSl for your tire
• Tire pressure for the 12” t im & tire should be at 80 psi
Follow posted speed limits but do not exceed 65 mpli.
A WARNING A
Before loading Trailer, Trailer must be properly connected to
the Tow Vehicle to stabilize the Trailer Failure to follow this
warning could result in property damage, personal itijuty and
death.
_
12