Craftsman 919.769020 - Manual (Page 12)

MAINTENANCE
CUSTOMER RESPONSIBiLiTIES TABLE
MAINTENANCE TASK
Before each use
Every 25
hours oryearly Every 50
hours oryeariy Every -RTO
hours oryeariy
PRESSURE WASHER
Check/ciean inlet screen.
X 1
Check high pressure hose.
X
Check soap and chemical hose and filter X
Check gun and wand forieaks. X
Purge pump ofairand contaminants
X
Change pump oi!
X X
ENGINE
Check
Oil
level X
Change engine oil X
Clean aircleanerand precieaner X
Clean engine muffier& fingerguard
X
Clean/replace spark plug
X
product Specifications
Pressure Washer Specifications
Pressure 2600
Flow Rate 2.7 GPM
Cleaning Units (psi x GPM) 7020
Engine Specifications
RPM 3600
Rated Horsepower 6.5
Spark Plug Gap 0.030” (0.75mm)
Gasoline Capacity 3 Quarts
Oil SAE 30 weight
General Recommendations
The warranty of the high pressure washer does not
cover items that have been subjected to operator
abuse or negligence. To receive full value from the
warranty, operator must maintain high pressure
washer as instructed in this manual.
Some adjustments will need to be made period-
ocally to maintain your high pressure washer.
Once a year you should clean or replace the spark
plug and clean or replace the air filter and check
the gun and wand assembly for wear. A clean
spark plug and clean air filter assure proper
fuel-air mixture and help your engine run better
and last longer.
NOTE: Over time the o-rings in the gun assembly
become worn. Attached to your owners manual is a
repiacememt o-ring and split backup ring.
12