Craftsman 917.28922 - Manual (Page 16)

MAINTENANCE
MAINTENANCE
SCHEDULE
BEFORE
EACH
USE
EVERY
8
HOURS
EVERY
25
HOURS
EVERY
50
HOURS
EVERY
100
HOURS
EVERY
SEASON
BEFORE
STORAGE
Check Brake Ooeration
%/ i/
Check Tire Pressure ✓ ✓
Check Operator Presence & ROS Systems ✓
Check for Loose Fasteners ✓ ✓ ✓
Check/Replace Mower Blades ✓ s
Lubrication Chart ✓ ✓
Check Battery Level ✓ 4
Clean Battery and Terminals
✓ ✓
Check Transaxle Cooling 1/
Check Mower Levelness ✓
Check V-Belts ✓
Check Engine Oil Level ✓ ✓
Change Engine Oil (with oil filter) ✓ 1,2
Change Engine Oil (without oil filter) ✓ ’1,2 ✓
Clean Air Filter ✓ 2
Clean Air Screen 1/2
Inspect Muffler/Spark Arrester ✓
Replace Oil Filter (If eguipped) 1/1.2
Clean Engine Cooling Fins ✓ 2
Replace Spark Plug ✓ 1 /
Replace Air Filter Paper Cartridge ✓ 2
Replace Fuel Filter ✓
1 - Change more often when operating under a heavy load or
in high ambient temperatures.
2 - Service more often when operating in dirty or dusty conditions.
GENERAL RECOiVIMENDATIONS
The warranty on this tractor does not cover
items that have been subjected to operator
abuse or negligence. To receive full value
from the warranty, operator must maintain
tractor as instructed in this manual.
Some adjustments will need to be made pe­
riodically to properly maintain your tractor.
At least once a season, check to see if
you should make any of the adjustments
described in the Service and Adjustments
section of this manual.
• At least once a year you should replace
the spark plug, clean or replace air filter,
and check blades and belts for wear. A
new spark plug and clean air filter ensure
proper air-fuel mixture and help your en­
gine run better and last longer.
BEFORE EACH USE
1. Check engine oil level.
2. Check brake operation.
3. Check tire pressure.
4. Check operator presence and
ROS systems for proper operation.
5. Check for loose fasteners.
3 - Replace blades more often when mowing In sandy soil.
4 - Not required If equipped with maintenance-free battery.
LUBRICATION CHART
© Spindle
Zerk
® Front Wheel»
Bearing zerk
■® Spindle
Zerk
'® Front Wheel
Bearing zerk
® Steering "
Sector Gear
Teeth
>
Engine
II
©General Purpose Grease
©Refer to Maintenance “ENGINE” Section
IMPORTANT: Do not oil or grease the pivot
points which have special nylon bearings.
Viscous lubricants will attract dust and dirt
that will shorten the life ofthe self-lubricating
bearings. If you feel they must be lubricated,
use only a dry, powdered graphite type lu­
bricant sparingly.
16