Assembly – Craftsman 536.88123 User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Parts packed separately in carton (not shown full size)
2 - Ignition Keys
(Attached to engine in plastic bag)
ASSEMBLY
A CAUTION:
Always wear safety
glasses or eye shields while assembling
snow thrower,
TOOLS REQUIRED FOR ASSEMBLY
1 - Knife to cut carton and plastic ties
2 - 1/2 inch wrenches (or adjustable
wrenches)
9/16 inch wrenches (or adjustable
wrenches)
Pliers (to spread cotter pin)
Screwdriver
Air pressure gauge
Measuring tape or ruler
The figure below shows the snow thrower in
the shipping carton.
2
-
1 -
1
-
1 -
1
-
The figure below shows the snow thrower
completely assembled.
References to the right or left hand side
of the snow thrower are from the viewpoint
of the operator's position behind the unit.
Auger Drive Lever
Speed
Shifter.
Lever
Ciutch
Cable
Traction Drive Lever
Traction Drive Cabie
emote Chute Controi
Crank
Assembiy
Headlight
Assembly