Craftsman 580.762010 - Manual (Page 11)

MAINTENANCE
CUSTOMER RESPONSIBILITIES
MAINTENANCE SCHEDULE
FILL IN DATES AS YOU COMPLETE
REGULAR SERVICE
MAINTENANCE TASK
HOURLY 0
Before Each
Use
PERATING
Every 25
Hours or
Yearly
INTERVAL
Every 100
Hours or
Yearly
SERVICE DATES
pressure washer
Check/clean water inlet screen
on quick-connect. xt
Check high pressure hose. X
Check detergent hose. X
Check spray gun and assembly for leaks. X
Purge pump of air and contaminants. X
ENGINE
Check oil level. X
Change engine oil. X*
Sennce air cleaner. X**
Clean/replace spark plug. X
Prepare for storage.
Prepare unit for storage if it is to
remain idle for longer than 30 days.
t Clean if clogged. Replace if perforated or tom.
• Change oil after first 2 hours then 25 thereafter. Change sooner when under dirty or dusty conditions.
Clean more often under dirty or dusty conditions.
GENERAL RECOMMENDATIONS
The warranty of the high pressure washer does not cover
items that have been subjected to operator abuse or neg­
ligence. To receive full value from the warranty, operator
must maintain high pressure washer as instructed in this
manual.
Some adjustments will need to be made periodically to
properly maintain your high pressure washer.
All adjustments in the Service and Adjustments section of
this manual should be made at least once each season.
• Once a year you should clean or replace the spark
plug and clean or replace the air filter and check the
gun and wand assembly for wear. A new spark plug
and clean air filter assure proper fuel-air mixture and
help your engine run better and last longer.
PRODUCT SPECIFICATIONS
Pressure Washer Specifications
PRESSURE 2000 Dsi
FLOW RATE 2.2 GPM
DETERGENT MIX Use undiluted deteraent
WATER SUPPLY
TEMPERATURE
Not to Exceed 140°F
Engine Specifications
ENGINE MODEL HONDA
RATED HORSEPOWER 5.0
DISPLACEMENT 160CC
SPARK PLUG: Type:
Set Gao to:
NGK: BPR6ES
or equivalent
0.028-0.031 in.
f0.70-0.80mm1
GASOLINE CAPACITY 1,8 U.S. Quart
OIL SAE 10W-30 weight
SOLID STATE IGNITION
AIR GAP
0.0125 inch
In the State of California a spark arrestor is required by
law (Section 4442 of the California Public Resources
Code). Other states may have similar laws. Federal laws
apply on federal lands.
Note: If you equip the engine of your pressure washer with a
spark arrestor muffler, the spark arrestor must be maintained in
effective working order by the owner/operator.
You can order a spark arrestor through your Sears Service
Center.
//