Service, Additional rules for safe operation, Rules for battery tools – Craftsman 315.115210 User Manual

Page 4

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

SERVICE

■ Tool service must be performed only by qualified

repair personnel. Service or maintenance performed
by unqualified personnel may result in a risk of injury.

When servicing a tool, use only Identical replace­

ment parts. Follow instructions in the Maintenance
section of this manual. Use of unauthorized parts or
failure to follow Maintenance Instructions may create a
risk of shock or injury.

IH::!:.... H

i

IHS

■ Hold tool by insulated gripping surfaces when

performing an operation where the cutting tool may

contact hidden wiring. Contact with a “live'’ wire will
also make exposed meta! parts of the too! “live” and
shock the operator.

ADDITIONAL RULES FOR SAFE OPERATION

■ Know your power tool. Read operator’s manual

carefully. Learn its applications and limitations, as
well as the specific potential hazards related to this
tool. Following this rule will reduce the risk of electric
shock, fire, or serious injury.

■ Always wear safety glasses with side shields. Ev­

eryday glasses have oniy impact resistant tenses. They
are NOT safety glasses. Following this rule will reduce
the risk of eye injury.

RULES FOR BATTERY TOOLS

■ Battery tools do not have to be plugged into an

electrical outlet; ther^forej they are always In
operating condition. Be aware of possible hazards
when not using your battery tool or when changing
accessories. Following this rule will reduce the risk of
electric shock, fire, or serious personal injury.

Do not place battery tools or their batteries near

fire or heat. This will reduce the risk of explosion and

possibly injury.

Batteries vent hydrogen gas and can explode In

the presence of a source of ignition, such as a pilot

light. To reduce the risk of serious personal injury,
never use any cordless product in the presence of
open flame. An exploded battery can propel debris and
chemicals. If exposed, flush with water immediately.

Do not charge battery tool in a damp or wet loca­

tion. Following this rule will reduce the risk of electric

shock.

For best results, your battery tool should be
charged in a location where the temperature is
more than 50“F but less than 100®F. Do not store
outside or In vehicles.

Under extreme usage or temperature condi­

tions, battery leakage may occur. If liquid comes

in contact with your skin, wash immediately with
soap and water, then neutralize with lemon juice
or vinegar. If liquid gets into your eyes, flush them

with clean water for at least 10 minutes, then seek

immediate medical attention. Following this rule will
reduce the risk of serious personal injury.

Advertising
This manual is related to the following products: