Hp surestore dvd-rom rack-ready drives - overview, Your hp surestore dvd-rom rack-ready drive, Operating the dvd drive – HP Surestore DVD-ROM Tape Array Module User Manual
Page 3: Replacing the drive, Troubleshooting, Warranty
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
HP Surestore DVD-ROM rack-ready drives - overview
HP Surestore DVD-ROM rack-ready drives are designed to be installed in a rack-mounted
HP Surestore Tape Array 5300. Refer to the documentation supplied with your tape array for tape array
installation instructions.
Before you start
Ensure the drive extractor lever is in the oy/'position. Slide the DVD-ROM
drive into an empty bay of the tape array. The DVD-ROM drive needs to
mate with the connectors at the back of the bay. Push the extractor lever
in until it locks the drive in position.
Step 2: Set the drive's SCSI ID
SCSI IDs for drives in the tape array are set on the back panel of the array.
We recommend that the drive is connected to a dedicated host bus
adapter. Make sure that the SCSI bus is terminated.
Your HP Surestore DVD-ROM rack-ready drive
Warranty