Samsung HMX-Q10TNIHMX-Q100TNIHMXDQ130TN - Manual (Page 103)

Troubleshooting
Display
An afterimage remains on the LCD screen.
The image on the LCD screen looks dark.
* This occurs if you disconnect the AC power adaptor or remove the battery before turning
the power off. *
* Ambient light is too bright. Adjust the brightness and angle of the LCD.
Recording
Pressing the Recording start/stop button
does not start recording.
The actual recording time is less than the
estimated recording time.
The recording stops automatically.
When recording a subject illuminated by
bright light, a vertical line appears.
When the screen is exposed to direct sunlight
during recording, the screen becomes red or
black for an instant.
During recording, the date/time does not
display.
You cannot record a photo image.
® Set your camcorder to the recording mode, '“page 26
« There is not enough free space to record on the storage media.
* Check if memory card is not inserted or write-protect tab is set to lock.
* The estimated recording time may vary depending on content and features used.
* When you record an object that moves fast, the actual recording time may be shortened.
* There is no more free space for recording on the storage media. Back up important files
on your PC and format the storage media or delete the unnecessary files.
® If you make recordings or delete files frequently, the performance of the storage media
deteriorates. If this occurs, format the storage media again.
® If you use a memory card with low writing speed, the camcorder automatically stops
recording videos and a corresponding message appears on the LCD screen.
® This is not a malfunction.
This is not a malfunction.
“Date/Time Display” is set to “Off". Set the “Date/Time Display” to On. '-»page i
Set your camcorder to the photo recording mode, '“page 26
Release the lock on the write-protection tab of the memory card if any.
The storage media is full. Use a new memory card or format the storage media,
»“page 77 Or remove unnecessary images, »“page 58
99