Onnectinq to a, Connecting to a high definition tv v )mi, I using a mini hdmi cable – Samsung HMX-Q10TNIHMX-Q100TNIHMXDQ130TN User Manual
Page 84: Connecting to a...fv, Connecting to a high definition tv with hdmi
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
onnectinq to a
CONNECTING TO A HIGH DEFINITION TV
V )MI
You can view High Definition (HD) quality videos recorded in HD
resolution on an HDTV using an HDMI connection. This camcorder
supports HDMI output to deliver high-definition video transfer.
■
Check if there is an HDMI input jack on your TV.
Use the AC power adaptor to power the camcorder when you attach
it to a TV.
Select “HDM! TV Out’’, —page 69
I Using a mini HDMI cable
80
a
Signal flow
Mini HDMI Cable
1 Turn on the camcorder.
• if you do not turn on the camcorder first, the camcorder may
fail to recognize the connected TV.
2
Connect the camcorder to the TV with a Mini HDMI cable.
3 Set the TV’s input or source selector to the HDMI input you’ve
attached the camcorder to.
• Refer to the TV’s instruction manual to see how to select the
TV’s input or source.
4
Select the playback mode on your camcorder, and then start to
play back videos or photos. pages 42-46
HDIdhHkih [>-iiiviK..ii Miiiiiiv
interface for transmitting unc
dìa interfa.
mpressed
The Anynet+ functb
Anynet -f function w
+ function on the ca
HDMI
ic-.,-,::
A;
to the AnynetT- supp
>! all dev
loie. Yo
icorder if
/net+ sup
¡rted TV's
It support the
setheAnyne
mected with
information,
TTiis camcorder is provided with the
“TV Connect Guide” menu function, if you
try to connect the camcorder to a TV and don’t have your user’s manucy, you can
use the
“TV Connect Guide" menu function to view connection instructions on the
camcorder’s screen, -»page 71
You can use only a 0 to A type Mini HDMI cable with this camcorder.
The HDMi jack on the camcorder is for output oniy.
If an Anynet+ supported TV is connected to the camcorder Py an HDM! cable,
turning on the camcorder may turn the TV’s pov'/er on. (an Anynet+ function) If you
don’t want this to occur, set
“Anynet+ (HDMI-CEC)’’ to “OFF", »»page 71
Use only HDMI 1.3 cable when connecting to the HDMi jack of this camcorder. If
the camcorder is connected 'with HDMI cables that are not version 1.3, the screen
display may not work.