Special effects, Recordings – Samsung HMX-Q10TNIHMX-Q100TNIHMXDQ130TN User Manual
Page 60
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Special effects
for
recordings
------ Total time for recordinc
I Recó-ding Interval
Time for recording on the
storage media (a video clip
i Time Lapse REC)
B
o
mt
Í-
m
t£i
^
44
The Time Lapse Recording function records image frames
í
¡a predefined interval over the total recording time to produc
time-lapse video,
:
Time Lapse Recording is useful for filming the following sub
* 1 SC-'.crú ; i^(
* A
r.
iiCsl
:• Clouds rolling by in the sky
:
i±i
fca i<.
l«S23iS
m
m
\u ii
56
Time lapse recording mode is released once reoording has been finished. To start another Time Lapse Reoording, repeat steps 1 to 3.
When the camcorder sets the Fader function to On or exits from the Art Film mode, the Time Lapse REC function is automaticaliy set to Off.
60 captured images compose a video of 1 second length. Since the minimum length of a video to be saved by your camcorder is one second, the interval defines how
long the time lapse recording should be. For example, if you set the interval to
"5 Sec”,
time lapse recording should be set to at least
1
0 minutes to record a minimum
video length of
2
seconds
{120
images).
Time lapse REC function lets the camcorder record up to 72 hours until you stop recording or turn the camcorder's power off.
Once time lapse recording finishes the camcorder switches to the standby mode.
You cannot pause recording during Time lapse recording.
Press the
Recording start/stop
button if you want to stop time lapse recording.
Audio is not recorded during time lapse recording.
If a video recording fills up 1.
8
GB of storage memory, a new recording file is automatically started at that point.
If the battery charge is exhausted during the time lapse recording, the camcorder saves the recording up to that point and switches to standby mode. After some time,
it displays a warning message, then turns off automaticaliy.
If memory runs out during a Time Lapse REC, the camcorder switches to standby mode after saving what was recorded so far.
We recommend using the AC power adaptor for a time lapse recording.