Tape coni, Slow motion, Replay – Samsung VR5160 User Manual
Page 19: Shuttle buttons, V-lock, Automatic tracking (a.trk), Key lock, Vcr operation
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
VCR Operation
Tape Coni
REPLAY
Slow Motion
Press the
SLOW
+ or - button while a cassette is playing for slow motion.
Press the
SLOW
buttons repeatedly to vary slow motion speed from 1/5 to 1/30 of normal
playback.
Press the
PLAY
button twice to resume normal viewing.
Replay
Press the
REPLAY
button when a video is playing at normal speed or in slow motion, and the
VCR will rewind for about five seconds of material in SP mode or about fifteen seconds in SLP
mode, then play back the section again.
Shuttle Buttons
Shuttle buttons on the remote control offer one-touch search speed playback.
Press 6 to advance or 4 to reverse playback in play mode. Playback speed is determined by
how many times you press the shuttle button.
V-LOCK
During still mode, press the
V-LOCK
buttons to reduce picture “jitter” (bouncing up and down).
A small amount of “jitter” or some “streaks” are normal during still viewing.
A.TRK
Automatic Tracking (A.TRK)
Press the
A.TRK
button to automatically adjust cassette tracking.
Key Lock
If you do not want others to operate the VCR (for example if you have programmed a timer recording) you can set
the VCR to lock out all button controls.
1
Press and hold the
TV/VCR
button on the remote
control for 5 seconds. The VCR display will show
“SAFE” when the feature is activated.
To resume normal mode, press and hold the
TV/VCR
button again for 5 seconds. “SAFE” will
disappear and the VCR will operate normally.
r
n r r
J n r c
15