Service and adjustment – Craftsman 536.881800 User Manual
Page 32
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SERVICE AND ADJUSTMENT
HOW TO REPLACE
THE AUGER SHEAR BOLT
The augers are secured to the auger
shaft with special shear bolts. These
shear bolts are designed to break and
protect the machine if an object be
comes lodged in the auger housing. Do
not use a harder bolt as the protection
provided by the shear bolt will be lost.
A
WARNING; For safety and to
protect the machine, use
only original equipment
shear boits.
To replace a broken shear bolt, proceed
as follows. Extra shear bolts were pro
vided with the unit.
1
.
2
.
3.
Stop the engine. Disengage all con
trols.
Disconnect the spark plug wire.
Make sure all moving parts have
stopped.
Align the hole in the auger with the
hole in the auger shaft. Install the
new
shear pin
and
spacer.
See
Figure 45.
Connect the spark plug wire.
Figure 45
F-0410108L
32