Cleaning, Service and adjustivients, Tractor – Craftsman 917.271023 User Manual

Page 22: To remove mower, Service and adjustments

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

• Place new fuel filter In position in fuel

line with arrow pointing towards carbu­
retor.

• Be sure there are no fuel line leaks and

clamps are properly positioned.

• Immediately wipe up any spilled gaso­

line.

CLEANING

• Clean engine, battery, seat, finish, etc.

of all foreign matter.

• Keep finished surfaces and wheels free

of all gasoline, oil, etc.

• Protect painted surfaces with automo­

tive type wax.

We do not recommend using a garden

hose to clean your tractor unless the elec­

trical system, muffler, air filter and carbure­
tor are covered to keep water out. Water

in engine can result in a shortened engine
life.

SERVICE AND ADJUSTIVIENTS

.^CAUTION: Before perfonming any service or adjustments:

• Depress clutch/brake pedal fully and set parking brake.

• Place motion control lever in neutral (N) position.

• Place attachment clutch in “DISENGAGED” position.
• Turn ignition key “OFP and remove key.
• Make sure the blades and all moving parts have completely stopped.
• Disconnect spark plug wire from spark plug and place wire where it cannot come in

contact with plug.________________________________________________________

TRACTOR

TO REMOVE MOWER

Mower will be easier to remove from the

light side of tractor.

• Place attachment clutch in “DISEN­

GAGED” position.

• Move attachment lift lever forward to

lower mower to its lowest position.

• Roll belt off engine pulley.
• Disconnect clutch rod from clutch lever

by removing retainer spring.

• Disconnect anti-swaybar from chassis

bracket by removing retainer spring.

• Disconnect suspension arms from rear

deck brackets by removing retainer

springs.

_

Clutch Lever-

Clutch Rod

Suspension *
Arms

Retainer

Spring

• Disconnect front links from deck by

removing retainer springs.

• Raise lift lever to raise suspension

arms. Slide mower out from under trac­

tor.

IMPORTANT: If an attachment other than

the mower deck is to be mounted on the
tractor, remove the front links.
TO INSTALL MOWER
• Raise attachment lift lever to its highest

position.

• Slide mower under tractor with dis­

charge guard to right side of tractor.

• Lower lift lever to its lowest position.
• Install mower in reverse order of

removal instructions.

Retainer
Spring

Engine Pulley

Front
Link

Retainer Springs

{Both Sides)

Retainer

Springs

(Both Sides)

Anti-Swaybar

Advertising