Craftsman 917.271023 User Manual
Page 32
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
TROUBLESHOOTING CHART
PROBLEM
CAUSE
CORRECTION
Lo^s of drive
• Freewheel control In “dis
engaged" position.
• Motion drive belt worn,
damaged or broken.
• Air trapped in transmis
sion during shipment
or servicing.
• Place freewheel control in
“engaged" position.
• Replace motion drive belt.
• Purge transmission.
Engine “backfires"
when turning
engine “OFP
• Engine/®throttle control not
set at “SLOW"
position for 30 seconds
before stopping engine.
• Move throttle control to
“SLOW” position and allow
to idle for 30 seconds before
stopping engine.
32
Advertising