Craftsman 536.885020 - Manual (Page 11)

OPERATION
KNOW YOUR SNOW THROWER
READ TH!S OWNER’S MANUAL AND SAFETY RULES BEFORE OPERATiNG YOUR SNOW
THROWER. Compare the illustrations with your snow thrower to familiarize yourself with the location of various
controls and adjustments Save this manual for future reference.
AUGER DRÍVE
LEVER
TRACTION DRIVE
LEVER
CRANK
ASSEMBLY
CHUTE DEFLECTOR
r«^
SCRAPER BAR
FIG. 9
SEARS TRAC-PLUS SNOW THROWERS conform to the safely standards of the American National Standards
Institute.
AUGER DRIVE LEVER - Starts and stops the auger and
impeller (snow gathering and throwing).
TRACTION DRIVE LEVER - Propels the snow thrower
forward and in reverse.
SPEED SHIFTER LEVER - Selects the speed of the
snow thrower {6 speeds forward and 2 speeds reverse)
HEADLIGHT - Turns on whenever the engine is running.
CRANK ASSEMBLY - Changes the direction of snow
throwing through the discharge chute.
CHUTE DEFLECTOR - Changes the distance the snow
is thrown.
DISCHARGE CHUTE - Changes the direction the snow
is thrown
WEIGHT TRANSFER PEDAL- Engage for heavy snow
conditions, to keep the snow thrower from climbing drifts
and hard-packed snow. When released, it eases trans­
port of the snow thrower.
HEIGHT ADJUST SKIDS - Adjusts the ground clearance
of the auger housing.
IGNITION KEY - Must be inserted to start the engine,
ELECTRIC STARTER BUTTON - Used to Start the en­
gine using the 120 V electric starter.
RECOIL STARTER HANDLE - Starts the engine manu­
ally,
CHOKE CONTROL - Used to start a cold engine
PRIMER BUTTON - Injects the fuel directly into the
carburetor or mainfold for last starts in coid weather
THROTTLE CONTROL - Controts the engine speed
11