Important, Safety rules – Craftsman 536.885020 User Manual

Page 2

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

A

CAUTiON; ALWAYS DISCONNECT SPARK PLUG WIRE AND
PLACE WIRE WHERE IT CANNOT CONTACT SPARK PLUG TO
PREVENT

ACCIDENTAL

STARTING

WHEN

SETTING-UP,

TRANSPORTING, ADJUSTING OR MAKING REPAIRS.

SAFETY RULES

A

IMPORTANT

SAFETY STANDARDS REQUIRE OPERATOR PRESENCE CONTROLS TO MINIMIZE THE

RISK OF INJURY. YOUR SNOW THROWER IS EQUIPPED WITH SUCH CONTROLS. DO NOT

ATTEMPT TO

defeat

THE FUNCTION OF THE OPERATOR PRESENCE CONTROL UNDER

ANY CIRCUMSTANCES.

BEFORE USE

• Read the Owner’s Manual carefully. Be thor­

oughly familiar with the controls and the proper
use of the snow thrower. Know how to stop the
show thrower and disengage the controls
qjjickfy,

»

Do not operate the snow thrower without wear­

ing adequate winter outer garments. Wear

footwear that wili improve footing on slippery
surfaces.

®

Keep the area of operation clear of all persons,

particularly small children, and pets.

® Thoroughly inspect the area where the snow

thrower is to be used and remove all doormats,
sl4ds, boards, wires, and other foreign objects.

® Use extension cords and receptacles as speci­

fied by the manufacturer for ali snow throwers

w|:h electric drive motors or electric starting

motors.

® Use only attachments and accessories ap­

proved by the manufacturer of the snow thrower
(such as tire chains, electric start kits, etc.)

® Never operate the snow thrower without good

visibility or light Always be sure of your footing,
and, keep a firm hoid on the handles. Walk;
never run.

® Ttiis snow thrower is for use on sidewalks,

driveways, and other ground level surfaces,
CAUTION should be exercised while using on
steep sloping surfaces. DO NOT USE SNOW
THROWER

ON

SURFACES

ABOVE

GROUND LEVEL, such as roofs of residences,
gàrages, porches or other such structures or
briHdings.

® Check shear bolts and other bolts at frequent

intervafs for proper tightness to be sure the
snbw thrower is in safe working condition.

® Disengage all clutches and shift into neutral

before starting the engine.

® Adjust the snow thrower height to clear grave!

or'crushed rock surface.

® Lèi engine and snow thrower adjust to outdoor

temperatures before starting to clear snow.

FUEL SAFETY

*

Handle fuel with care; it is highly fiarrimable.

® Use an approved fuel container,
*

Check fuel supply before each use, allowing

space for expansion as the heat of the engine

and/or sun can cause fuel to expand.

® Fill fueltankoutdoorswith extreme care. Never

fill fuel tank indoors.

*

Replace fuel tank cap securely and wipe up

spilled fuel.

*

Never remove fuel tank cap or add fuel to a

running engine or hot engine.

®

Never store fuel or snow thrower with fuel in the

tank inside of a building where fumes may

reach an open flame or spark.

OPERATING SAFETY

® Never allow children or young teenagers to

operate the snow thrower and keep them away
while it is operating. Never allow adults to
operate the snow thrower without proper in­
struction. Do not carry passengers.

® Always wear safety glasses or eye shields

during operation orwhile performing an adjust­
ment or repair to protect eyes from foreign

objects that may be thrown from the snow
thrower.

® Exercise extreme caution when operating on

or crossing gravel drives, walks, or roads. Stay
alert for hidden hazards or traffic.

® Do not put hands or feet near or under rotating

parts. Keep clear of the discharge opening at
all times.

®

Exercise caution to avoid slipping or falling, es­

pecially when operating in reverse.

® Do not clear snow across the face of slopes.

Exercise caution when changing direction on

slopes. Do not attempt to clear steep slopes.

® Never operate the snow thrower without proper

guards, plates or other safety protective de­

vices in place.

Advertising