Craftsman 987.799601 - Manual (Page 17)

OPERATION
KNOW YOUR CHIPPER/VAC
READ THIS OWNER*S MANUAL AND SAFETY RULES
BEFORE OPERATING YOUR CHiPPERA/AC, Figure
17 identifies the following key features and controls on
your machine:
(A) COLLECTION BAG; Used to collect material
resulting from vacuuming or chipping operation,
(B) ENGINE CONTROL LEVER: Used to control the
speed of the engine.
(C) ENGINE PRIMER: Provides additional fuel from the
carburetor to the cylinder for use when starting a cold
engine.
(D) AIR CLEANER: Filters dirt which could damage
engine parts.
(E) CHIPPER CHUTE: Used to process small
branches.
(F) FUEL TANK: Stores engine fuel
(G) RECOIL STARTER ROPE; Used to start the
engine.
(H) BLOWER DEFLECTOR: Directs airflow when
machine is used in blower configuration,
(I) SAFETY INTERLOCK ROD: Part of the safety
interlock system which stops the engine if either the
collection bag or blower deflector is not installed
{J) VACUUM HOSE (OPTIONAL); Used for remote
vacuuming.
(K) BAFFLE PLATE: Used with optional vacuum hose,
(L) VACUUM INLET CAP: Covers vacuum hose inlet
when machine is used for walk-behind vacuming or
chipping,
(M) SPARK PLUG; Provides spark for engine ignition
(N) VACUUM HEIGHT ADJUSTMENT LEVER: Allows
adjustment of the space between the bottom of the
machine and the ground.
Figure 17: Features and Controls.
17