Clearing jams and clogs, Mm\m, Operation – Craftsman 987.799601 User Manual
Page 26
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
OPERATION
CLEARING JAMS AND CLOGS
mm\m
Before inspecting, cleaning or servicing the machine,
stop the engine and malce sure that all moving parts
have come to a complete slop. Disconnect the spark
piug wire and secure it away from the spark plug.
Failure to follow this instruction could result in
personal injury.
A clog or jam can cause the vacuuming and discharging
operations to decrease or even stop completely If this
occurs, take the following steps:
1, STOP THE ENGINE IMMEDIA TEL Y and wait for all
moving parts to stop. Disconnect the spark plug
wire and secure it away from the spark piug.
2. Check and clean, if necessary, the following areas in
the order given.
For all vacuuming operations:
1. Check that the collection bag is not overfilled.
2. While the bag is removed, check that the discharge
opening is not clogged.
For walk~behind vacuuming:
1. Check that the vacuum inlet opening is not clogged.
2. Use a stick to clear away debris.
For using the blower deflector:
1, Check that the blower deflector discharge opening is
not clogged
2. Use a stick to clear away debris
For using the vacuum hose:
1.
Check that the hose is not clogged.
2. Remove the hose and use a long stick to clear away
any debris from the vacuum inlet opening.
26