Bevel ripping – Craftsman 113.298761 User Manual
Page 35
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
BEVEL RIPPING
When bevel ripping materiai 6 inches or narrower, use
Fence on the right side of the blade ONLY. This will
provide morespace betweenthe Fence andthe sawblade
for use of a Push Stick. If the Fence is mounted to the
left, the Sawblade Guard may interfere with proper use
of a Push Stick.
Keep your hands out of the blade path. Feed the
workpiece by pushing forward only on the part of the
workpiece that will pass between the blade and fence.
Stop your thumbs at the front edge of the table.
Finish the cut with the appropriate pusher.
When thru-sawing a rip 1/2 inch to 2 inches wide, the
Push Stick CANNOT be used because the Guard will
interfere. USE the Auxiliary Fence/Work Support and
Push Block.
Attach Auxiliary Fence/Work Support to Rip Fence with
two “C” clamps.
35