Craftsman 358.79104 User Manual

Page 4

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

^WARNING: Stop unit and dis­

connect the spark plug before per­

forming maintenance {except carbure­
tor adjustments).

• Look for and replace damaged or

loose parts before each use. Look

for and repair fuel leaks before use.

Keep in good working condition.

• Replace trimmer head parts that are

chipped, cracked, broken, or dam­
aged in any other way before using

the unit.

• Maintain unit according to recom­

mended procedures. Keep cutting
line at proper length.

• Use only Craftsman® brand replace­

ment line. Never use wire, rope,
string, etc.

• Install required shield properly before

using the unit. Use only specified trim­
mer head; make sure it is properly
installed and securely fastened.

• Make sure unit is assembled cor­

rectly as shown in this manual.

• Make carburetor adjustments with

lower end supported to prevent line

from contacting any object,

• Keep others away when making car­

buretor adjustments.

• Use only recommended Craftsman

accessories and replacement parts.

• Have all maintenance and service

not explained in this manual per­

formed by a Sears Service Center.

FUEL SAFETY

• Mix and pour fuel outdoors.
• Keep away from sparks or flames,
• Do not smoke or allow smoking near

fuel or the unit or while using the unit.

• Avoid spilling fuel or oil. Wipe up all

fuel spills before starting engine.

• Move at least 10 feet (3 meters)

away from fueling site before start­
ing engine. Stop engine and allow it

to cool before removing fuel cap.

• Empty the fuel tank before storing or

transporting the unit. Use up fuel left

in the carburetor by starting the en­
gine and letting it run until it stops.

• Store unit and fuel in area where fuel

vapors cannot reach sparks or open
flames from water heaters, electric

motors or switches, furnaces, etc.

• Always store gasoline in a container

approved for flammable liquids.

UNIT / MAINTENANCE SAFETY

TRANSPORTING AND STORAGE

• Stop the unit before carrying.
• Allow engine to cool before storing

or transporting in vehicle,

• Empty the fuel tank before storing or

transporting the unit. Use up fuel left

in the carburetor by starting the en­

gine and letting it run until it stops.

• Store unit and fuel in area where

fuel vapors cannot reach sparks or

open flames from water heaters,
electric motors or switches, furnaces,
etc.

• Store unit so line limiter blade can­

not accidentally cause injury. The
unit can be hung by the shaft.

• Store unit out of reach of children.

This unit is not equipped with an anti­
vibration system and is intended for

occasional use only.

SAFETY NOTICE;

Exposure to vibra­

tions through prolonged use of gaso­

line powered hand tools could cause
blood vessel or nerve damage in the

fingers, hands, and joints of people

prone to circulation disorders or ab­
normal swellings. Prolonged use in

cold weather has been linked to blood

vessel damage in otherwise healthy

people. If symptoms occur such as
numbness, pain, loss of strength,

change in skin color or texture, or loss
of feeling in the fingers, hands, or

joints, discontinue the use of this tool

and seek medical attention. An anti­

vibration system does not guarantee
the avoidance of these problems. Us­

ers who operate power tools on a con­

tinual and regular basis must monitor

closely their physical condition and the
condition of this tool.

SPECIAL NCTICE:

This unit is

equipped with a temperature limiting

muffler and spark arresting screen

which meets the requirements of Cali­
fornia Codes 4442 and 4443. AIIU.S.
forest land and the states of California,

Idaho, Maine, Minnesota, New Jersey,

Oregon, and Washington require by
law that many internal combustion en­

gines be equipped with a spark arrest­

ing screen. If you operate in a locale

where such regulations exist, you are

legally responsible for maintaining the

operating condition of these parts.

Failure to do so is a violation of the
law. For normal homeowner use, the
muffler and spark arresting screen will
not require any service. After 50 hours

of use, we recommend that your muf­

fler be serviced or replaced by a

Sears Service Center,

Advertising