Craftsman 358.79104 User Manual

Page 6

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

• Check air intake opening, blower

tubes or vacuum tubes frequently,

always with engine stopped and
spark plug disconnected. Keep

vents and discharge tubes free of

debris which can accumulate and
restrict proper air flow.

• Never place any object in air intake

opening as this could restrict proper
air flow and cause damage to the
unit.

• Never use for spreading chemicals,

fertilizers, or other substances which

may contain toxic materials.

• To avoid spreading fire, do not use

near leaf or brush fires, fireplaces,
barbecue pits, ashtrays, etc.

BRUSHCUTTER SAFETY

 DANGER:

Blade can thrust vio­

lently away from material it does not
cut. Blade thrust can cause amputa­

tion of arms or legs.

MM

WAR NIN G

; Do not use trim mer

head as a fastening device for the
blade.

etc.) which can be thrown or become
entangled in the blade or trimmer line.
• Throw away and replace blades that

are bent, warped, cracked, broken
or damaged in any other way.

• Install required shield properly be­

fore using the unit. Use the metal

shield for all metal blade use.

WARNING:

Only use brushcut-

ter attachments that provide a metal

shield with protruding nose.

• Use only specified blade and make

sure it is properly installed and se­
curely fastened.

• Cut from your left to your right.

• Always use the handlebar and a

properly adjusted shoulder strap

with blade (see ASSEMBLY instruc­
tions in brushcutter attachment

operator’s manual).

CULTIVATOR SAFETY

^WARNING: Rotating tines can

cause serious injury. Keep away from

rotating tines. Stop the engine and

disconnect the spark plug before un­
clogging tines or making repairs.

1

Y

’ Y..

• The blade continues to spin after the

throttle is released or engine is turned

off. The coasting blade can throw ob­

jects or seriously cut you if accidental­

ly touched. Stop the blade by contact­
ing the right hand side of the coasting
blade with material already cut.

a WARNING;

Inspect the area to

be cut before each use. Remove ob­

jects (rocks, broken glass, nails, wire,

aWARNING:

Inspect the area to

be cultivated before starting the unit.

Remove ail debris and hard and sharp

objects such as rocks, vines, branch­
es, rope, string, etc.
• Avoid heavy contact with solid objects

that might stop the tines. If heavy con­
tact occurs, stop the engine and in­

spect the unit for damage.

• Never operate the cultivator without

the tine cover in place and properly

secured.

• Keep the tines and guard clear of

debris.

• After striking a foreign object, stop

the engine, disconnect the spark

plug and inspect the cultivator for

damage. Repair before restarting.

Advertising