Craftsman 358.79104 User Manual

Page 5

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

^WARNING: Inspect the area to

be trimmed before each use. Remove
objects (rocks, broken glass, nails,

wire, etc.) which can be thrown by or

become entangled in line. Hard ob­

jects can damage the trimmer head

and be thrown causing serious injury.
• Only use the trimmer attachment for

trimming, scalping, mowing and

sweeping. Do not use the trimmer
attachment for edging, pruning or
hedge trimming.

• Cut only from your left to your right.

Cutting on right side of the shield will

throw debris away from the operator.

ADDITIONAL SAFETY RULES

FOR OPTIONAL ATTACHMENTS

^WARNING: For each optional

attachment used, read entire opera­

tors manual before use and follow ail
warnings and instructions in manual

and on attachment.

WARNING: Ensure handlebar is

installed when using edger or brush-
cutter attachments. Attach handlebar
above arrow on safety label on the up­
per shaft (engine end of unit).

if

your

edger or brushcutter attachment does
not include a handlebar, a handlebar
accessory kit (#530071451) is avail­
able from your Sears Service Center.

LINE TRIMMER SAFETY

Blade

rotates

momentarily

after

the

trigger is

raieasad.j

Handlebar

EDGER SAFETY

^WARNING; Inspect the area to

be edged before each use. Remove
objects (rocks, broken glass, nails,

wire, etc.) which can be thrown by the

blade or can wrap around the shaft.
• Blade rotates momentarily after the

trigger is released. The blade can

seriously cut you or others.

• Allow blade to stop before removing

it from the cut.

Allow blade to stop

before removing it
from the cut

• Throw away blades that are bent,

warped, cracked, broken or dam­

aged in any other way. Replace

parts that are cracked, chipped, or

damaged before using the unit.

• Do not attempt to remove cut materi­

al nor hold material to be cut when

the engine is running or when cut­
ting blade is moving.

• Always keep the wheel and depth

adjusting skid in contact with the
ground.

• Always push the unit slowly over the

ground. Stay alert for uneven side­

walks, holes in the terrain, large

roots, etc.

• Always use the handlebar when us­

ing edger attachment.

BLOWERA/ACUUM

safety

^WARNING: Inspect area before

starting unit. Remove all debris and

hard objects such as rocks, glass,

wire, etc. that can ricochet, be thrown,

or otherwise cause injury or damage
during operation.

• Do not set unit on any surface ex­

cept a clean, hard area while engine

is running. Debris such as gravel,

sand, dust, grass, etc,, could be

picked up by the air intake and

thrown out through discharge open­

ing, damaging unit, property, or

causing serious injury to bystanders
or operator,

• Never place objects inside the blow­

er tubes, vacuum tubes or blower
outlet. Always direct the blowing de­

bris away from people, animals,

glass, and solid objects such as

trees, automobiles, walls, etc. The
force of air can cause rocks, dirt, or

sticks to be thrown or to ricochet

which can hurt people or animals,

break glass, or cause other damage.

• Never run unit without the proper

equipment attached. When using
your unit as a blower, always install

blower tubes.

Advertising