Craftsman 836.27233 - Manual (Page 2)

TABLE OF CONTENTS
SECTION PAGE
Warranty................................................................................................. 2
Product Specifications........................................................................ 2
Safety Instructions................................................................................ 3
Accessories and Attachments............................................................. 6
Know Your Brad Nailer......................................................................... 7
Operation ............................................................................................. 7
Maintenance ..........................................................................................8
Troubleshooting Guide......................................................................... 9
Parts .....................................................................................................10
WARRANTY
FULL ONE YEAR WARRANTY ON CRAFTSMAN PROFESSIONAL
ELECTRIC NAILER
If this Craftsman Nailer fails due to a defect in material or workmanship within
one year from the date of purchase, Sears will REPAIR it, free of charge.
WARRANTY SERVICE IS AVAILABLE BY SIMPLY RETURNING THE
TOOL TO THE NEAREST SEARS STORE OR CRAFTSMAN OUTLET IN
THE UNITED STATES .
This warranty gives you specific legal rights, and you may also have other
rights which vary from state to state.
Sears, Roebuck and Co., Dept. 817 WA, Hoffman Estates, IL 60179
PRODUCT SPECIFICATIONS
Power Source
Nailing Speed
Nail Size - Diameter
- Head size
- Length
Magazine Capacity
Dimensions
Weight
AWARNING
120V, 60Hz, 9 Amps., AC only
1 Nall per Second
.039 ' .049 inch
.070 ' .087 inch ■'
3/8 - 1 -3/16 inch
100 Nails
8-1/2 inches long x 2-1/2 inches wide x 10 i.^.ches high
4.7 pounds
To avoid electrical hazards, fire hazards, or damage to the tool, use proper
circuit protection.
Your nailer is wired at the factory for 120V operation. Connect to a 120V, 15 amp
branch circuit and use a 15 amp time delay fuse or circuit breaker. To avoid shock
or fire, replace power cord immediately if it is worn, cut or damaged in any way.
Page 2