Howto load your brad nailer (figure 1) – Craftsman 836.27233 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
KNOW YOUR BRAD NAILER
OPERATION
HOWTO LOAD YOUR BRAD
NAILER (FIGURE 1)
1.
2
.
3.
4.
Unplug nailer from power source.
Use only brad nails recommended;
see brad nail chart.
Push up the latch (1) toward the
magazine and slide out the
magazine (2).
Position the nailer exposing the
magazine chamber (3).
5. Load nails into the magazine, nail
points facing down toward the bottom
of the nailer.
6. When loading different lengths,
do not load nail heads into the
upper part of the slot.
Load so that the nail points are at
the bottom of the magazine (4).
7. Close magazine (2), making sure that
the nails stay seated in the track.
8. Make sure that the latch (1 ) is
securely locked.
Page 7