Using built-in ttl flash – Nikon N6006 User Manual
Page 121
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
USING BUILT-IN TTL FLASH
• Do not touch the flash when firing if: it may be hot due
to normal operation.
• Never fire flash more than 20 times with a 5 sec. or
shorter interval. Continuous firing over 20 times may
deteriorate flash performance. After each major flash
shooting, let the flash rest at least 10 minutes before
firing again.
•When the built-in TTL flash is up, an accessory
Speedlight will not fire. To make Speedlight work, store
built-in TTL flash in down position.
76
Advertising