Nikon N6006 - Manual (Page 9)

Command dial/shift button functions
Combined with buttons listed below, the command dial and shift button provide various functions.
Button With Command Dial With Shift Button
Metering system (K)/Slow sync
button To select metering system, rotate dial while
pressing this button. (See page 41)
With shift button pressed, this button is used to
set/cancel slow sync for flash photography.
Exposure mode (MODE)*/Automatic
Balanced Fill-Flash (B3) button To select exposure mode, rotate dial while
pressing this button. (See page 47)
With shift button pressed, this button is used to
set/cancel automatic balanced Rll-Rash for
flash photography.
Film speed (ISO) button/Film speed
setting mode (DX/M) button
To manually set film speed, rotate dial while
pressing this button. (See pages 25 to 26)
With switch film speed setting mode (auto for DX-
coded film or manual), push it while pressing shift
button. (See page 24)
Film advance mode (DRIVE)/
AF-L function button*
To set film advance mode, rotate dial while
pressing this button. (See page 27)
With shift button pressed, this button is used to set/
cancel autofocus lock function. (See pages 32 to 34)
Exposure compensation ( g j )
button To make exposure compensation, rotate dial
while pressing this button. (See pages 66 to 67)
—
Auto exposure bracketing (BKT)
button
See pages 68 to 72.
Self-timer (0 )/Rear-curtain sync
button Rotate it to set self-timer operation.
(See pages 73 to 74) With shift button pressed, this button is used to
set/cancel rear-curtain sync lor (lash photography.
—
With shift button pressed, rotate command dial for flash output level compensation.
For details, see pages 35 to 37 in "FLASH PHOTOGRAPHY", a separate instruction book.
"Pushing any two of MODE, ISO, DRIVE and BKT buttons simultaneously lor more than one second sets N6006 for basic shooting.
In the following cases, command dial can be used by itself.
In Programmed auto exposure mode Turn command dial for flexible program
In Shutter-Priority auto or Manual exposure mode Turn command dial to set shutter speed