Nikon COOLPIX AW100 User Manual

Page 16

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

<lmportant> Shockproof, waterproof dustproof condensation, GPS/digital compass

1. Keep the battery-chamber/memory carcJ slot cover closed and wash off

the camera with fresh water.

Immerse the camera in a shallow basin filled

with freshwater for 10 minutes.
• If the buttons or switches do not operate

properly, foreign substances may have adhered.
Since this could cause a malfunction, immerse

the camera in fresh water and shake it

sufficiently in the water to remove the any

foreign substances from the camera.

• When the camera is immersed in the water, a few air bubbles may come out from

the water drain holes of the camera such as openings in the microphone or

speakers. This is not a malfunction.

2. Wipe off water droplets with a soft cloth and dry the camera in the well-

ventilated and shady place.

• Place the camera on a dry cloth to dry it.

Water will flow out from openings in the microphone or speakers.

• Do not dry the camera with hot air from a hair dryer or clothes dryer.
• Do not use chemicals (such as benzine, thinner, alcohol, or cleanser), soap, or neutral

detergents.

If the waterproof packing or body of the camera becomes deformed, the waterproof
performance will deteriorate.

3. After making sure that there are no water droplets on the camera, open

the battery-chamber/memory card slot cover and gently wipe off any

water or sand remaining inside the camera with a dry soft cloth.

• If you open the cover before the camera is thoroughly dried, water droplets may fall

on a memory card or battery.

The water droplets may also seep inside the battery-chamber/memory card slot

cover (in locations such as waterproof packing, hinges, memory card slot, or
terminals).

If that happens, wipe the water off with a dry soft cloth.

• If the cover is closed when the inside is wet, this could cause condensation or

malfunction.

• If the microphone or speaker openings are clogged with water droplets, the sound

may deteriorate or become distorted.

- Wipe the water off with a dry soft cloth.
- Do not puncture the microphone or speaker openings with a sharp implement. If

the inside of the camera is damaged, the waterproof performance will
deteriorate.

Advertising