Smart portrait mode (shooting smiling faces, 2 shooting ends, Smart portrait mode (shooting smiling faces) – Nikon COOLPIX AW100 User Manual

Page 73: Gfaces)

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Smart Portrait Mode (Shooting Smiling Faces

.

,gFaces)

If the camera detects smiling faces, the shutter is automatically released without
pressing the shutter-release button (Smile timer). The skin softening function

makes facial skin tones softer.

I

Display the shooting screen ^ O (shooting mode) button ^ Smart portrait mode

I

([I]26, 27)

1

Frame the picture and wait for the subject to

smile.

• When the camera detects a human face, a yellow

double border (focus area) is displayed around that

face. When the camera has focused on that face, the

double border will light in green for a moment and

focus is locked.

• Up to three faces can be detected. When more than one face is aetectea, tne race

closest to the center of the frame is framed by a double border and the others by
single borders.

• If the camera detects that the face framed by the double border is smiling, the

Smile

timer

(dl50) feature is activated and the shutter is automatically released.

• Each time thc^ shuttei is leleabed, automatic shooting UMiig tace detection and smile

detection is repeated.

2

Shooting ends.

• To finish automatic shooting of smile detection, press the

Ck

button to switch to

another shooting mode.

C Notes on Smart Portrait Mode

• The digital zoom is not available.
• Under some shooting conditions, faces and smiling faces may not be detected properly.
• See "Notes on Face Detection" (CXlbS) for more information.

B Auto Power Off in Smile Timer Mode

When

Smile timer

is set to

On,

the auto off function

(C]95)

is activated and the camera turns off

when anyone of the situations indicated below persists and no other operations are performed.
• The camera does not detect any faces.
• The camera detected a face, but cannot detect a smile.

B When the Self-timer Lamp Blinks

When using smile timer, the self-timer lamp blinks when the camera detects a face and flickers

immediately after the shutter is released.

B Releasing the Shutter Manually

The shutter can also be released by pressing the shutter-release button. If no faces are detected, the

camera focuses on the subject at the center of the frame.

49

Advertising