Setting and adjusting the date/time, B-46 – Canon IXUS Z70 User Manual
Page 46
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting and Adjusting the Date/Time
After changing the battery, or when traveling
internationally, it may be necessary to set or adjust the
camera’s date and time using the following procedure.
If “......... ” blinks on the LCD panel when you
change the battery, perform steps 2, 3, 4, and 6.
1
Press the Date button to
display the Date mode.
• The time is set in Date +
Time mode, step 5.
Seiect button
Press the Select button.
• Use the push-button
projection on the strap
clasp
^ When you replace the
battery, the blinking
“------- " display changes to
"’98 1 r,
• The digits to be set start
blinking
* •
Press the Set button.
• Use the push-button
projection on the strap
clasp.
• Press repeatedly until the
blinking digits show the
desired value.
Set button
B-46