Setting the print quantity, Setting the print quantity for the next shot, Press the s print quantity button – Canon IXUS Z70 User Manual
Page 52: Take the picture, B-52
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting the Print Quantity
This camera allows you to set the print quantities for a print to
between 0 and 9. This means you can increase the number of
prints without having to wait for the film to be processed, and
also allows to avoid printing pictures that were taken by
accident. Please note that the print quantity setting or changes
to the setting only apply to the next frame to be shot or to the
previous shot.
• The print quantity dispiay is automaticaiiy set to 1 print
(P-1) when negative film is ioaded.
• When slide film is loaded, the print quantity dispiay is
automatically set to no print (P-0).
Setting the Print Quantity for the Next Shot
------------
TUta
D«>tB
P - J
UlO.
i»^i ^1
-C__________ ^
1
Press the S print
quantity button.
• Use the push-button
projection on the strap to
push the button.
^ “P-1" (1 print) appears in
the LCD panel.
Press the i3 button until
the number of prints you
want to set for the next
shot appears in the LCD
panel.
^The print quantity display
changes as follows: P-1,
P-2,„ P-9, P-0, P-1.
Take the picture.
^ After the shot has been
taken, the print quantity
setting is canceled and
the normal single print
setting is resumed.
B-52