Canon BF-9S User Manual

Page 20

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

o

• Check that the Jens cover is fully open before

pressing the shutter button. The shutter does not

operate unless the lens cover is fully open.

• There is a very short delay between the shutter

button being pressed and the shutter releasing. In

general, you should continue to hold the camera still

until you hear the sound of the film winding on, which
Indicates that the shot has been taken.

B

O

' Avant de déclencher, vérifiez que le volet de protection de

l’objectif est complètement ouvert. Le déclencheur ne

fonctionne pas si le volet de protection de l'objectif n’est

pas complètement ouvert.

■ 11 existe un bref délai entre la pression sur le déclencheur

et la libération de l’obturation. Il est généralement

recommandé de tenir l’appareil immobile jusqu’à ce que
vous entendiez le bruit d’avance du film, indiquant que la

photo a été prise.

m

O

' Compruebe que la tapa del objetivo esté abierta

antes de oprimir el disparador. El obturador no

funcionará a menos que la tapa del objetivo esté

completamente abierta.

' Transcurre un intervalo de tiempo sumamente corto

desde que se oprime el disparador hasta que se libera
el obturador. Por lo general, mantenga la cámara
Inmóvil hasta que escuche el ruido de avance de la
película indicando que se ha terminado de tomar la foto

48

Advertising