Press start/stop button, When recording has ended, press a (eject) button, Turn camera off – Canon E 430 User Manual
Page 29
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
J3
m
O
O
zi
g
z
CD
PAUSE
7. Press start/stop button.
____
• Recording starts and “REC” appears in viewfinder. KijOJ
• Tally lamp flashes rapidly.
• See page 31-54 for information on making your recordings
more effective.
8. Press start/stop button again to temporarily
pause recording. ^0
• Press start/stop button once again to resume recording.
• See “Record Review” (p. 32) to check your recording.
9. When recording has ended, press A (EJECT)
button.
• Video cassette compartment opens.
10. Remove video cassette and close video
cassette compartment again.
11. Turn camera off.
• OPERATE indicator goes off.
N otes;
•
The tape counter will be reset to 0:00:00 each time a video cassette is loaded.
• The camera automatically turns off if record pause mode lasts more than approximately 7 minutes. To
resume recording turn camera on and press start/stop button.
• For security, check the viewfinder display for correct mode during shooting.
• Avoid recording near sources of electric or magnetic fields, such as a TV tower, which can cause noise
in the picture or a camera malfunction.
• If tape speed is changed during recording, the tape will contain noise at that point.
27