Canon EOS 1000 F User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
1) Remove the rear lens cap by turning it
counterclockwise.
2) Remove the body cap by turning it coun
terclockwise.
3) Align the lens’ red dot to the camera's
red dot and turn the lens clockwise un
til it stops and locks with a click.
• To remove the lens, turn the lens
counterclockwise while pressing the
lens release button.
4) Set the lens’ focus mode switch to AF.
5) Remove the front lens cap.
•The electronic contacts must be clean
for proper connection. Do not touch
these contacts.
•Do not set the lens on its rear end
without the lens cap attached to pre
vent damage to the electronic
contacts.
Advertising