Canon EOS 1000 F User Manual
Page 29
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
1) Make sure the command dial is not at L.
2) Open the back cover by siiding the latch
down.
3) Insert the film as shown with the fiat end
of the cartridge on top.
4) Carefuily pull the film tip across until it
reaches the orange mark.
5) Make sure the fiim iies fiat and cióse the
back cover.
Film winding starts and the frame counter
counts up. When the film is oompletely
wound, the shutter is released once;
however, no picture is taken. The film car
tridge symboi and the number of avaiiable
frames are displayed in the LCD panei.
• If the film cartridge symbol blinks, the
film has not been loaded properly and
the shutter will not release. Reload the
film.
• Film becomes soft and tears easily in
high humidity. Keep it stored in its
canister until loading.
15