Checking the exposure – Canon EOS 1000 F User Manual
Page 58
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Checking the Exposure
• If the minimum aperture value of the
lens in use blinks, clear the focus points
by turning the command dial to another
position and returning it to DEP. Move
back from the subject or sv/itch to a
wide-angle lens or zoom lens’ wide-
angle setting and repeat steps #2
through 4. When the aperture value
stops blinking, the distance range will be
sharply focused and correct exposure
will be obtained.
• If both the shutter speed and the aper
ture value blink, the exposure is not cor
rect. Use an ND filter in bright
situations. The flash can not be com
bined with this mode.
32
Advertising