Canon 155 A User Manual
Page 23
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Switching the AUTO/MANU. Switch
This switch is used to set the prescribed
apertures coupled with AE flash photo
graphy. There are two aperture settings for
AE flash photography: the red position and
green position. (The MANU. position in
the center of this switch should be set when
you perform manual flash photography.)
Reading the Apertures
The aperture fixed by the AUTO/MANU.
switch is the value below the aperture index
mark of the same color as the switch position.
For example, if the AUTO/MANU. switch is
set at the red position, the aperture below
the red aperture index mark is used for
AE flash photography. The aperture will
change depending on the setting of the ASA
film speed. In the case of ASA 100, the
red position is f/2.8 while the green position
is f/5.6.
13