Canon 155 A User Manual
Page 28
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
setting of the AE mode selector and the AT
dial. This is possible only when the AE ex
posure is within the AE coupling range. Once
the pilot lamp relights, the camera will
automatically switch back to AE flash
photography. This means that you can shoot
continuously if necessary while the camera
alternates between the AE flash mode and
the normal AE mode.
Switching Off
Set the main switch at OFF after completion
of flash photography in order to prevent
battery drain. The connecting circuit be
tween the flash unit and camera is cut off
when the main switch is set at OFF, and
normal AE photography can be performed
with the flash unit still attached to the
16