Canon 155 A User Manual
Page 41
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
HOW TO USE WITH THE CANON
AV-1
Automatic flash photography with the AV-1
is briefly as follows:
1. Set the camera’s selector dial to or “A
Self”.
2. Set the AUTO/MANU. switch to either
the green or red AUTO position and read
the corresponding aperture from the
calculator dial.
3. Set that same aperture on the lens aperture
ring.
The shutter speed will be set automatically
to the X-synchronization speed of 1/60 sec.
and the meter needle in the viewfinder will
point to 1 /60 sec. when the pilot lamp glows.
Refer to Part II (p. 19) regarding more de
tailed explanation. For manual flash photog
raphy with the AV-1 refer to pp. 20-21.